108 / 1235
ENGINE
76
18.Remove the Oil pump and its gasket.
19.Turn the Crankshaft and bring a pair of pistons
near BDC position. Unscrew connecting rod
bearing cap mounting nuts.
20.Push the piston assemblies out of cylinders using
wooden handle of mallet.
21.Remove connecting rod bearing shells and duly
mark them with paint on their back in case these
are to be reused.
22.Verify serial numbers on connecting rod bearing
caps and connecting rods.
23.Remove remaining pistons in a similar manner
NOTE:
It is essential to assemble connecting rod
bearing caps to their respective connecting rods on-
ly.
24.Unscrew and remove main bearing-cap mounting
bolts.
! CAUTION
Mark the bearing cap locations.