16 / 654
GENERAL
5
Important Information
Always ensure your vehicle has sufficient petrol
in the tank.
In case of fuel mode switching from PETROL to
CNG mode during normal running CNG
indicator lamp turns ON.
DO’s
Always get the vehicle repaired/serviced at the
Authorized TATA Service only.
Never carry out any repair work on your own or
from any other personnel other than from
Authorized TATA Service center.
Check CNG fuel system periodically for
leakages.
Even though the Safety Solenoid valves (on
cylinder & pressure regulator) closes
automatically when you switch off the Ignition, it
is recommended to close the manual service
valves during any service / repair activity on the
vehicle.
Ensure adequate ventilation around the vehicle
during repair works.
Ensure the gas in the gas lines are consumed
by running the engine with closed manual
service valve and following the tester service
for emptying the lines.
Remove / shield the CNG tanks during the
Welding / brazing work on the Vehicle.
Get repaired / replaced in case of any damaged
fuel system component.
Use dry chemical (Class B) fire extinguisher in
case of unlikely event of fire.
Don’ts:
Over filling the CNG Tank can cause safety
issues. Please DON'T over fill the tank beyond
its effective capacity (16 liters of water capacity
for each cylinder.).
Don’t park the vehicle near any fire sources.
Never use naked flame / fire to check gas
leakages.
Never carryout any welding / brazing on the
CNG cylinder.
Avoid direct contact with CNG, it may cause
frost burns.
Don’t tamper any electrical or mechanical
settings. For any clarifications please contact
the Authorized TATA Service center.