STEERING - MANDO 30 CONCERN CAUSE REMEDY CAN Communicati on / Cluster malfunction 1. Main ECU communication issue 2. Cluster RPM mis-communication Note: CAN signal / cluster RPM for CEPS. Error code (DTC) may generated related to CEPS) Need to replace problem making part. Not CEPS . IF THE EPAS SYSTEM INDICATOR COMES ON Reasons for the indicator to come on Comes on when there is a problem with EPAS systems. What to do when the indicator comes on Stop the vehicle in safe place and restart the engine. If the indicator comes on and stay on, immediately have your vehicle inspected by a dealer. NOTICE: If you repeatedly turn the steering wheel at an extremely low speed, or hold the steering wheel on the full left or right position for a while, the system heats up. The system goes into a protective mode, and limits its performance. The steering wheel becomes harder and harder to operate. Once the system cools down, EPAS system is restored. Repeated operation under these condition can eventually damage the system.
RkJQdWJsaXNoZXIy MTIwNTUz