STEERING - MANDO 22 8.6. OBJ ON-VEHICLE REMOVAL NOTE: RAP need not be removed; to remove OBJ on vehicle disconnect the OBJ at Steering Knuckle. 8.7. DO’S & DON’TS DON’TS 1. Never lift steering gear by holding bellows. 2. Never store steering gear resting on its bellows. 3. Never store / transport steering gear with bellows fouling with other objects. 4. Never remove port plug before connecting with mating parts. 5. Never use cotton waste which will cause contamination. 6. Do not adjust ball joint nuts except during wheel alignment 7. Never lift steering gear by holding IBJ’s. 8. Do not remove the protective cap from the input shaft during transit or before assy. 9. Do not remove the protective cap from the OBJ during transit or before assy. 10. Do not use cotton waste for cleaning. 11. Don’t hit or hammer steering wheel to avoid capsule collapse & column serration damage. Image for Illustration only 12. Don’t use improper packing parts or fell down parts possibilities of column tube collapse. 13.Column collapsed & marking disturbed. 14. While removing don’t hit on cross car beam. 15. Don’t keep the part directly on floor.
RkJQdWJsaXNoZXIy MTIwNTUz