STEERING 12 11.Remove the mounting screw of upper universal joint. REFITMENT: 1. Keep the front wheels in straight ahead position. 2. Follow the reverse procedure of removal. NOTE: Wheel alignment is necessary after installation (Refer wheel alignment procedure). !! WARNING Never lift steering column by holding servo unit. Never lift steering column by holding tilt lever. Never keep steering column resting on servo unit. Handle with care while transport/movement. Do not use the steering column if dropped. Always disconnect the battery while replacing column/servo unit. The steering column shall be replaced in service in case of damage in a vehicle accident. The steering column shall not be repaired in any means. 7.3 INTERMEDIATE SHAFT REMOVAL 1. Remove the universal joint bolt between steering column & intermediate shaft. 2. Remove the universal joint bolt between intermediate shaft and rack & pinion assembly. 3. Disengage the intermediate shaft from rack & pinion assembly and take out the intermediate shaft. REFITMENT: 1. Keep the front wheels in straight ahead position. 2. Follow the reverse procedure of removal. NOTE: Wheel alignment is necessary after installation (Refer wheel alignment procedure). !! WARNING Do not reuse the universal joint bolts.
RkJQdWJsaXNoZXIy MTIwNTUz