SUSPENSION 6 3. TIGHTENING TORQUES NOTE: Unless otherwise specified, no oil/lubricant/thread locker allowed on fastener, fastener bearing surface or surface where the fastener will sit while assembly. All self-locking type fasteners not to be re-used once joint is dismantled. All fasteners to be paint marked after torque tightening is applied. *MARKED BOLTS TO BE TIGHTEN IN PRE-LOADING CONDITIONS. SR. NO. DESCRIPTION FASTNER TYPE TORQUE VALUE (Kg-m) LOCATION FRONT SUSPENSION 1. Front strut mounting on knuckle M12X30 12 ± 0.6 2. Strut top mounting NYLOC NUT M8 2.3 ±0.1 3 Driveshaft lock nut M22X1.5 24.5 ± 1.5
RkJQdWJsaXNoZXIy MTIwNTUz