TRANSAXLE - TA5260 1 1. TECHNICAL SPECIFICATIONS: TYPE Synchromesh on all forward gears and sliding mesh on reverse gear. OIL CAPACITY 2.1 Liters OIL SPECIFICATION GEAR OIL EP80WLL NEXT GEN SS6582 MODEL TA5260 with 5 speed Manual (5 forward and 1 reverse) GEAR RATIO GEAR DIESEL 1st 3.667 2nd 1.913 3rd 1.219 4th 0.895 5th 0.690 REV. 3.545 FD 3.737 GEAR SHIFT Cable type floor mounted with international H Pattern with reverse lift & shift arrangement. 2. PRECAUTIONS: 1. Do not lubricate the Shifter Selector Cables. 2. Use sealing anaerobic compound for all oil seals O.D. 3. Ensure that the engaging gears are properly seated over their respective splines. 4. Ensure that the Shifter finger lugs of transaxle are in line with each other while assembling the top cover assembly. 5. Keep off the oil from clutch disc, flywheel and pressure plate surface. 6. Ensure that the oil seals are free from dust particles. 7. Use only recommended transaxle oil. 8. Do not reuse the oil seal, while assembling transaxle. 9. Lubricate drive shaft birfield and tripod joint only with grease gun as referred in manual. 10. Ensure that the boots are not damaged during assembly of driveshaft. 11. Assemble and remove the transaxle component bearings only with special tools.
RkJQdWJsaXNoZXIy MTIwNTUz