1.2L REVOTRON ENGINE 62 INSTALLATION 1. Route the new belt through the crankshaft pulley, then the alternator and water pump pulley and then to the compressor and finally through the auto tensioner to the crankshaft pulley. 2. Rotate the tensioner point by using ring spanner opposite to belt tension and install the belt with the help of clevis meter measure the proper belt tension. CAUTION Ensure that the tool is correctly located during the belt fitment process. Make sure that while rotating the crank shaft pulley the belt should not slip away from AC Compressor pulley.
RkJQdWJsaXNoZXIy MTIwNTUz