ELECTRICAL 56 16. STEERING CUM IGNITION SWITCH (IF APPLICABLE) FUNCTION To lock the steering wheel To start & stop the engine To switch on accessories and other electrical system LOCATION It is fitted on steering column below the steering wheel and combi switch. REMOVAL & REFITMENT OF STEERING LOCK CUM IGNITION SWITCH (SLCIS): REMOVAL: 1. Disconnect battery negative terminal. 2. Remove steering nacelle. (Refer “Removal & refitment of steering nacelle" from steering section.) 3. Remove steering wheel. (Refer “Removal & refitment of steering wheel" from steering section.) 4. Remove combi switch. (Refer “Removal & Refitment of combi switch." ) 5. Disconnect steering lock cum Ignition switch connection. 6. Steering lock cum ignition switch mounting screws are anti loosening. To remove the Ignition lock, screw to be loosened by using flat screw driver and hammer. 7. Remove assembly of SLCIS. REFITMENT: 1. Refit SLCIS and tighten its mounting screws. 2. Reconnect SLCIS connection. 3. Refit combination switch. 4. Refit steering Wheel. 5. Refit steering nacelle. 6. Refit battery negative terminal.
RkJQdWJsaXNoZXIy MTIwNTUz