ELECTRICAL 36 7.9. FRONT FOG LAMP The fog lamps are located in the lower part of the front bumper. The bulb used for the fog lamp function is a halogen H16 bulb, 12V - 19W. Fog lamp on/off is done by using master light switch. REMOVAL: 1. Open engine hood & ensure all lamps are in OFF condition. 2. Remove the front bumper (For procedure refer Front bumper removal process in Body section.) 3. Disconnect the electrical connection of fog lamp. 4. Remove the front bumper. 5. Loosen and remove the fog lamp mounting fasteners and full out it. REFITMENT For refitment follow the procedure in reverse. BULB REPLACEMENT PROCEDURE 1. Disconnect the electrical connection. 2. Remove the bulb assembly by rotating in anticlockwise direction. 3. Remove the DRL assembly by rotating in anticlockwise direction. 4. Take out the bulb from holder& replace with new one. 5. Fit the assembly by rotating in clockwise direction. 6. Connect the electrical connection.
RkJQdWJsaXNoZXIy MTIwNTUz