BODY 49 2.42 REAR WIPER MOTOR REMOVAL 1. Open the cap of rear wiper blade and arm assembly as shown in figure. 2. Loosen and remove rear wiper blade and arm assembly mounting fastener. 3. Remove rear wiper blade and arm assembly. 4. Remove outside wiper motor mounting nut (Tightening torque 0.64 Kg-m TO 0.93 Kg-m). 5. Remove tail gate trim. (For procedure Refer Tailgate Trim removal process.) 6. Disconnect wiper motor connector. 7. Loosen and remove three wiper motor fastener to remove wiper motor (Tightening torque 0.7 Kg-m to 0.95 Kg-m). FITMENT For fitment follow reverse procedure of removal. 2.43 FRONT WIPER REMOVAL 1. Remove Wiper Spindle Cap. 2. Loosen and remove wiper blade mounting fastener and pull wiper arms out of wiper spindle (Tightening torque 1.5 kgfm). 3. Lift the bonnet and fix it in the stay rod. 4. Remove plenum caps from plenum trim near Driver and Co driver side wiper spindles. 5. Remove Plenum Cover assembly. (For procedure refer Plenum Cover assembly removal process.)
RkJQdWJsaXNoZXIy MTIwNTUz