ELECTRICAL 14 K. REMOVAL OF INSTRUMENT CLUSTER: WARNING Remove the key from key barrel. This is necessary to ensure proper initialization of Instrument Cluster Parameters like Odometer value learning from Immobilizer and DTCs in other ECUs against Instrument Cluster. Removing Instrument Cluster with Key IN is strictly prohibited otherwise it will corrupt the odometer value. 1. Remove steering wheel. (Refer “Removal & refitment of steering wheel" from Steering Section.) 2. Remove steering nacelle Lower. (Refer “Removal & Refitment of steering nacelle" from Steering Section.) 3. Lower steering column from top mounting to access lower mounting of Instrument cluster. (Refer Steering section). 4. Remove the mounting screws on the instrument cluster cover. 5. Remove the mounting screws on the instrument cluster. 6. Remove Instrument cluster electrical connections. 7. Remove Instrument cluster REFITMENT Follow the procedure in reverse order for fitment. WARNING Swapping to analyze cluster defect: It is strictly prohibited to swap clusters for defect analysis from vehicles or from available stock. Due to immobilizer Odometer learning strategy, cluster odometer value will change permanently to a higher value. For defect analysis, use Diagnostics Tool or ETC (Engineering Test MODE.
RkJQdWJsaXNoZXIy MTIwNTUz