ELECTRICAL 54 XVII. DEACTIVATION OF BLIND VIEW MONITOR This feature is deactivated when user turn off the left/right turn indicator XVIII. UNDERSTANDING STATIC OVERLAYS INDICATION Red Line Indicates, if rear objects are behind this colored line, you are not allowed to change the lane. If you still change the lane, your vehicle will hit the object. Yellow Line Indicates, if rear objects are behind this colored line, you have to take utmost care. However, objects fall in this zone, may not hit vehicle. Green Line Indicates, if rear object is behind this colored line, you have to be cautious. Still you can safely change the lane. NOTE When SVS is in active condition then user turn on the left/right turn indicator then system should display the blind view monitoring and if user turn off the turn indicator then system return back to the SVS screen. When SVS is not in active condition, user turn on the left/right turn indicator then system should display the blind view monitoring. Once user turn off the turn indicator then system return back to infotainment home screen. XIX. DO’S AND DON’TS As the camera is, IP protected, do not detach, disassemble or modify in any manner from the actual position. This will show required visual information in display. Do not use camera when tailgate is open. If tailgate is open, visual information may not be the actual rear view of the vehicle & system will warn with message ‘Tail Gate Open, Please close. Do not use camera when driver/passenger door is open. If any one of the door is open, visual information may not be the actual view of the vehicle & system will warn with message ‘Door Open, Please close’. And also corresponding door side display shall be in dark image. Do not use camera when ORVM is folded. If ORVM is folded, visual information may not be the actual view of the vehicle & system will warn with message ‘ORVM Folded’. When the camera is operated under fluorescent lights, sodium light or mercury light etc., illuminated areas on the lens may appear to flicker in the display. Do not attach any advertisement or styling or any kind of stickers on top of camera. If this happens, camera cannot provide you the visual image and may damage camera. Do not add any accessory, which will obstruct camera field of view. XX. CLEANING CAMERA 1. Due to environmental reasons, dust, mud or fog may accumulate on the camera lens. So regularly clean the camera lens. 2. Use water to clean the camera lens. Do not use extreme cold or hot water. Rapid changes in temperature may brittle the camera lens. Do not apply High Pressure water for cleaning. 3. Wipe the camera lens with soft cloth. 4. Do not use hard cloth or material to wipe the camera lens. This will cause scratches on the camera, and leads to deteriorated visual image on the display. 5. Do not apply organic solvent, car wax, window cleaner or glass coat to clean the camera. If this is applied, wipe it off as soon as possible. 6. Do not use chemical solvents such as strong detergents containing high alkaline or volatile organic solvents (gasoline, acetone etc). This may damage the camera lens 7. Do not apply heavy force on lens, while cleaning. 8. Do not remove mud, snow on the camera lens using stick or hard material. Use normal water and soft cloth.
RkJQdWJsaXNoZXIy MTIwNTUz