ELECTRICAL 17 F15 CDL 15A F16 BCM3-MID BCM 20A F17 RELAY COILS 5A F18 IMMO BATT 5A F19 BCM1-BASE/MID BCM 20A F20 PEPS/BLOWER RLY 5A ACCESSORIES FUSE 5A F21 REAR USB A TYPE 5A F22 MIRROR ADJUST MOTOR/WIRELESS CHARGING(ACC) 5A F23 POWER SOCKET-1 15A F24 TELEMATICS BATT 5A KEY IN 5A F25 VENTILATED SEAT DDR/CO-DR 10A F26 SUNROOF 20A F27 FRONT USB C TYPE 5A F28 - - F29 WIRELESS CHARGING(IGN) 5A F30 REAR WIPER RLY 10A E. FUSE AND RELAY REPLACEMENT Removal Fuse box is located behind the glove box. To access the fuse box, Cover Steering Column needs to be removed first. Remove 1. Remove the Cover Steering Column (refer for body draft for removal) 2. Remove the mounting screw and Pull out the fuse from fuse box modules from available cutout as shown below. 3. If fuse is blown, replace with same rating fuse from spare fuses provided in engine compartment fuse box 4. Fit back the glove box by following reverse procedure. REPLACEMENT PROCEDURE FOR RELAYS 1. Turn the ignition key to lock position. 2. Check each relay, if faulty replace with same rating relay. 3. If replaced relay of same rating is not working properly, there is probably a serious electrical problem. REPLACEMENT PROCEDURE FOR FUSES 1. Turn the ignition key to lock position. 2. Check each fuse and look for broken/open controls link wire inside the fuse. If it is burnt, replace it with one of the spare fuses of same rating. 3. If replaced fuse of same rating burns out then, there is probably a serious electrical problem. Note: Use designated fuses only. CIRCUIT SCHMATICS Refer Book 3 DTCs Refer Book 2
RkJQdWJsaXNoZXIy MTIwNTUz