HV ELECTRICAL SYSTEM 20 9. Remove any dust on the Charging Gun and Charging Inlet. Connect the charging gun to vehicle AC Charging Inlet. 10. Switch on the AC supply. 11. Charging Gun will be locked after switching on the AC supply. You will hear a “click” sound, when the gun is connected correctly. Image for Illustration purpose only NOTE When vehicle is in Charging Mode, it will not go in Drive (D), Sport (S) or Reverse(R). 12. Normally the car starts automatically charging. If not, please refer ‘Troubleshooting Guide for Normal Charging’ table. 13. Open the driver door and see instrument cluster to know SoC, time to charge and gun connection status. 14. In case the park brake is not engaged or partially engaged the charging won’t start and ‘Engage Park Brake to start charging’ message will be displayed on instrument cluster. NOTE Infotainment and cabin cooling can be used during charging of the vehicle by putting the vehicle in Ignition. 15. To stop the charging, switch off the AC power supply. 16. The charging gun will be unlocked by pressing unlock switch at fascia switch. 17. Pull out the plug. 18. Put on the protective caps on both Charging Gun and Vehicle Inlet. NOTE Once Normal/Fast charging is completed, 90 seconds of time gap is required before the vehicle can be started. After turning off the vehicle, wait for four seconds if you want to start the vehicle again. In emergency charging shutdown conditions, Gun won’t be unlocked. Contact authorised TATA Service Centre. In unforeseeable circumstances if the charging gun is stuck to the socket after charging is done, user has to contact the service personnel. No mechanical override to remove the charging gun is available for user.
RkJQdWJsaXNoZXIy MTIwNTUz