Assembling the pack cover After connections are done, put the top cover • of the battery pack for fixing a torque of 6-8 N.M is used. The Socket will move in clockwise direction. Performe IPX7 After closing the pack, it’s important to performe • the IPX7 test on the pack. GENERAL CHECK POINTS 1. After the replacements are done make sure to connect the wires as they were. 2. Check continuity across the replaced pack. 3. Mark the faulty ones and send them back to Pune office. G. REPLACMENT OF SMOKE SENSOR Dissasemmbling Connection Now remove the connection of the smoke • sensor coming from BMS harness. Disassembling Supporting sheet For replacing the supporting bracket Use 8mm • Hex Rotate it in anti-clockwise direction. Replacing the Smoke Sensor Replace the old SMOKE SENSOR with New • SMOKE SENSOR. Connection to be done as before. HIGH VOLTAGE ELECTRICAL SYSTEM (HV) 88
RkJQdWJsaXNoZXIy MTIwNTUz