PINOUTS SUPPLY VOLTAGE LEVEL ON VEHICLE SERVICE REMOVAL 1. Disconnect the battery connection. Remove the B pillar trim bottom. (For removal, 2. refer Body section.) 3. Disconnect the electrical connection from the front impact sensor. (RH side illustrated similar procedure to be follow for LH side). 4. Loosen and remove the mounting flange bolt and take out the front impact sensor from the vehicle. (RH side illustrated similar procedure to be follow for LH side). FITMENT For fitment, follow reverse procedure of removal. PIN NO PIN DESCRIPTION 1 SIGNAL 2 GROUND Minimum 5.25 V Nominal 6.20 V Maximum 16.5 V SRS 21
RkJQdWJsaXNoZXIy MTIwNTUz