BONNET INSULATION AG. REMOVAL 1. Open the bonnet. 2. Pull out the insulation from the bonnet assembly. FITMENT For fitment follow reverse procedure of removal. PLENUM COVER AH. 1. Open the Bonnet. 2. Disconnect the negative terminal of battery. 3. Remove both front wiper arm and blade assembly. (Refer wiper arm and blade assembly removal process). 4. Pull out Grommet pin. 5. Disconnect washer pipe connection & pull out plenum cover. FITMENT For fitment follow reverse procedure of removal. NOTE While pulling out the Bonnet insulation, care should be taken such that clips do not get damage if found damaged replace the same with the new one. BODY 41
RkJQdWJsaXNoZXIy MTIwNTUz