T. TAIL GATE TAIL GATE REMOVAL I. 1. Open the tail gate. 2. Remove the C pillar trims (refer c pillar removal procedure). 3. Disconnect the tail gate all wiring harness located inside the “C” pillar trim and pull out the wiring harness from outside. 4. Remove the mounting screw and remove the gas balancer. Follow the same procedure at other end. 5. Remove the top hinge mounting of the tail gate by removing two mounting bolts. Follow the same procedure at the other end and separate the tail gate from the vehicle. FITMENT For fitment follow the reverse procedure of removal. Tail gate Opening from cabin NOTE Ensure proper tightening torque is given to the hinges of tailgate. For torque value refer to the tightening torque table. BODY 30
RkJQdWJsaXNoZXIy MTIwNTUz