REPAIRS 16. CALIPER BRAKE ASSSEMBLY FRONT BRAKE ASSEMBLY Ventilated disc brakes with single pot caliper of 54 mm piston diameter are provided for front brake. Salient features of disc brakes Caliper assembly consists of a caliper carrier bolted to the knuckle and the body assembly slides on twoguide rod pins used in the carrier (guide rod ‘A’ & ‘B’). Both the sliding guide rod pins are sealed against water and dust by boot guide rod thereby avoiding possible unequal sliding loads caused by dirt, corrosion. Drag of the pads is taken directly by the carrier; consequently, the pins are loaded only SR.NO DESCRIPTION 1 CYLINDER MACHINING 2 PISTON 3 BOOT PISTON 4 SEAL PISTON 5 BLEED SCREW 6 CAP BLEED SCREW 7 CARRIER MACHINING 8 GUIDE ROD A 9 ASSEMBLY GUIDE ROD B 10 BOOT GUIDE ROD 11 BOLT GUIDE ROD 12 SPRING PAD SR.NO DESCRIPTION 13 PAD KIT INNER 14 PAD KIT OUTER 15 PROTECTIVE PLUG 16 GREASE SACHET BRAKE (MR) 37
RkJQdWJsaXNoZXIy MTIwNTUz