BRAKE PEDAL ASSEMBLY REMOVAL 11. REMOVAL 1. To disconnect pedal from brake booster remove split pin as shown in fig. 2. Remove clevis pin to separate booster assembly from pedal. 3. Loosen and remove the brake mounting M8 nuts from panel firewall RHD. 4. Push out booster Assembly to make space to release brake pedal Bracket Assembly. 5. Pull out the brake mounting bracket along with brake pedal from the driver’s foot control area. INSTALLATION 1. Hold the brake control bracket on firewall. 2. Tighten the brake mounting bracket nut specified sequence & torque (2.0 - 2.5 Kg-m). 3. Match clevis hole to the pedal lever hole and insert clevis pin into the hole. BRAKE (LR) 24
RkJQdWJsaXNoZXIy MTIwNTUz