Remove Circlip from Knuckle. 16. Pull out Knuckle bearing using puller part No. 17. 2779 5890 3302. Using clamp part No. 2779 5890 3303 puller 18. part No. 2654 5890 3508 and rest part No. 2702 5890 2612 remove inner race of bearing from the hub. ASSEMBLY 1. Follow the above steps in reverse order in appropriate sequence for its assembly. 2. Tighten drive shaft nut 24.5 ± 1.5 kg-m torque and lock by staking. 3. Ensure that oil seal in transaxle is not damaged while fitting drive shaft. D. OVERHAULING OF KNUCKLE AND WHEEL HUB SUB ASSEMBLY Clean all the parts thoroughly and replace damage / worn out parts. With the help of drift part No. 2779 5890 3301 1. and 2640 5890 3511 fit bearing in the knuckle. NOTE Before Installation refer Sub assembly of knuckle / Hub & Bearing installation procedure. SUSPENSION (LR) 30
RkJQdWJsaXNoZXIy MTIwNTUz