6. Remove the tripot spider assembly from the axle shaft as showing below figure. If required tab the spider assembly gently using a nylon mallet. 7. Clean the following items thoroughly with cleaning solvent. Remove all traces of old grease and any contaminates. Tripot balls • Needle rollers • Housing • 8. Dry all the parts. Inspect these parts for damage or wear. (If any of the parts are damaged, the entire sub- assembly along with the outer housing needs to be replaced.) 9. After this remove the rubber boot from the axle shaft. DRIVESHAFT 12
RkJQdWJsaXNoZXIy MTIwNTUz