8. ON VEHICLE ASSEMBLY OF DRIVE SHAFT (LH & RH SIDE) 1. Install the Drive shaft into Knuckle End. 2. Install the Drive shaft into Transaxle End. 3. Insert the LCA ball joint in knuckle & tighten the mounting nyloc nut M10 and bolt with torque 5.5 Kgm. 4. Insert the steering Link ball joint into knuckle & tighten the nyloc nut with torque 5.5 ± 0.3 kgm. 5. By Using allen Key and Connect Upper ARB Link onto the Front Strut. 6. Apply Brake and Tighten Drive shaft Lock Nut. 7. Fix Mud liner front RH. DRIVESHAFT 9
RkJQdWJsaXNoZXIy MTIwNTUz