7. ON VEHICLE REMOVAL OF DRIVE SHAFT (LH & RH SIDE) 1. Remove Wheel Cap. 2. Loosen Front wheel nuts. 3. Lift the vehicle 4. Remove Front Wheels. 5. Remove Mud Liner. 6. Apply Brake and Remove Drive shaft Lock Nut. 7. Use Allen key and disconnect upper ARB link from Front strut. 8. Remove ball joint (steering rack) from steering knuckle from RH & LH sides using tool part no. 2702 5890 4602.(Refer Steering Section) 9. Remove stub axle ball joint Mtg. & Remove Lower Control Arm (LCA) using tool part no. 2702 5890 4602.(Refer suspension section) Pull out Knuckle End and take out RH Drive 10. shaft from Knuckle End. Swing out drive shafts from transaxle and 11. place it suitably alongside. DRIVESHAFT 7
RkJQdWJsaXNoZXIy MTIwNTUz