D. FUSE AND RELAY REPLACEMENT Fuse box is located behind the glove box. To access the fuse box, Cover Steering Column needs to be removed first. REMOVAL 1. Remove the Cover Steering Column (refer for body draft for removal) 2. Remove the mounting screw and Pull out the fuse from fuse box modules from available cutout as shown below. 3. If fuse is blown, replace with same rating fuse from spare fuses provided in Under Bonnet fuse box 4. Fit back the glove box by following reverse procedure. REPLACEMENT PROCEDURE FOR RELAYS 1. Turn the ignition key to lock position. 2. Check each relay, if faulty replace with same rating relay. 3. If replaced relay of same rating is not working properly, there is probably a serious electrical problem. REPLACEMENT PROCEDURE FOR FUSES 1. Turn the ignition key to lock position. 2. Check each fuse and look for broken/open controls link wire inside the fuse. If it is burnt, replace it with one of the spare fuses of same rating. 3. If replaced fuse of same rating burns out then, there is probably a serious electrical problem. SERVICE SCHEMATICS Refer Book 3 for Service Schematics. DTCs Refer Book 2 for DTC FUSE NO FUNCTION FUSE RATIN G R13 — — R14 — — R15 — — R16 — 20A R17 — — R18 — — NOTE Use designated fuses only LOW VOLTAGE ELECTRICAL SYSTEM (LV) 203
RkJQdWJsaXNoZXIy MTIwNTUz