DRIVE MODE KNOB Drive Mode knob is a rotary knob. User can change vehicle gear positions starting from Neutral (N), Drive (D), Sports (S), and Reverse (R) by rotating the knob to select the desired gear positions. To change the gear state (from N to D or N to R), brake should be pressed while rotating knob. Gear Selection knob is located on floor console. Drive mode: Drive mode selection switches are provided on floor console for activation. Press the switch to select the mode (ECO or Sport) & City mode will be default mode. ‘ECO ‘, and ‘SPORT’ drive modes knobs are provided at the two side of rotary knob. These modes can be used to adjust engine characteristics and vehicle performance in line with desired requirement. WELCOME STRATEGY When Ignition is switched ON from OFF, rotary knob will perform Welcome Strategy for 3 seconds. Changing gears during welcome strategy is not allowed. After welcome strategy, default gear position will be ‘N’ (Neutral). DRIVE MODE KNOB LOCK STRATEGY The rotary knob will allow fast rotation from S to R or R to S in static condition. DRIVE DISPLAY ON CLUSTER Current gear selected by user will be shown in the instrument cluster. DRIVE MODE KNOB ILLUMINATION The rotary knob will have the backlight illumination in the night condition when position lamp is ON. This illumination varies in accordance with the intensity levels set from instrument cluster. GEAR SELECTION KNOB FAILURE BEHAVIOR The rotary knob will turn on all function ON Indication LEDs. Please contact TATA Motors service centre. CONNECTION PIN DETAILS LOW VOLTAGE ELECTRICAL SYSTEM (LV) 61
RkJQdWJsaXNoZXIy MTIwNTUz