LOCATION Steering wheel switches mounted on Steering Wheel. REMOVAL 1. Remove steering wheel. Refer “Removal & Refitment of steering wheel” from Steering Section. 2. Remove two screws (LH & RH) of Paddle shifter highlighted in yellow from front side of the steering wheel. 3. Remove four screws highlighted to take out the steering wheel switches with the bezel. 4. Remove the wiring harness & replace the steering wheel switches with bezel assembly. INSTALLATION 1. Assemble the new steering switches with wiring harness. 2. Locate the new steering switches with bezel on the steering wheel. 3. Tight the mounting screws (4 Nos) of the switches. Tightening torque: 0.4 TO 0.6 Nm 4. Assemble the Paddle shifter (if equipped) & Tight the mounting screw (2 Nos). Tightening torque: 0.5- 0.6 Nm 5. Fit the steering wheel assembly. Refer “Removal & Re-fitment of steering wheel” from Steering Section NOTE There will be different combinations of LH & • RH steering wheel switch assembly for different functions based on vehicle feature list for different persona / variants. Switch main connector will be common for • all variants LOW VOLTAGE ELECTRICAL SYSTEM (LV) 59
RkJQdWJsaXNoZXIy MTIwNTUz