INSTALLATION 1. Connect the electrical connector of switch. 2. Position the switch onto the bezel and push fit the assembly. REMOVAL OF CO-DRIVER DOOR POWER SWITCH 1. Remove mounting screw. 2. Remove the switch assembly with bezel and disconnect the electrical connector & take out the switch assy. 3. Remove the switch assembly from bezel and disconnect the electrical connector & take out the switch assy. INSTALLATION 1. Connect the electrical connector of switch. 2. Position the switch onto the bezel and push fit the assembly. F. STEERING WHEEL SWITCHES WITH NOTE Follow the same procedure to remove remaining door window winding switches. NOTE Follow the same procedure to remove remaining door window winding switches. LOW VOLTAGE ELECTRICAL SYSTEM (LV) 54
RkJQdWJsaXNoZXIy MTIwNTUz