DIAGNOSTIC INFORMATION & PROCEDURE E. POWER WINDOW SWITCHES & INHIBIT SWITCH Window winding switches are for to move the window glasses Up & Down. Driver door window winding switch includes all door power window switches & inhibit switch (child safety). Inhibit Switch - Red indication on inhibit switch indicates that operation of glass from individual power window switch (mounted on respective door trim) is allowed (valid for co- river and both rear doors) No indication on inhibit switch indicates that operation of glass from individual switch (mounted on respective door trims) is inhibited. Auto down feature is only for Driver door window & it is time based. LOCATION Window winding switches are provided on RH side front door. Separate individual switch is provided on front door LH & rear RH / LH doors. WINDOW WINDING MODULE CONDITION POSSIBLE CAUSE CORRECTIO N / REFERENCE ITEM One or more of the window winders not working 1. Fuse (30A) for the respective door loose/ blown under cockpit LH Replace the fuse 2. 2 pin Window Winding motor Connector loose Fit the connector properly 3. 6 pole WWM Console switch connector loose Fit the connector properly All Window winders moving slowly/not working at all 1. Battery discharged Recharge the battery 2. WMM Console master switch 20 pole connector loose Fit the connector properly Auto down feature is not working No output from BCM Refer BCM Diagnosis LOW VOLTAGE ELECTRICAL SYSTEM (LV) 51
RkJQdWJsaXNoZXIy MTIwNTUz