3. Remove the mounting screws on tail lamp. 4. Remove C-Pillar Trims. (For removal refer CPillar removal procedure) 5. Pull out rear wheel arc Carpet on LH & RH side. 6. Disconnect the electrical connection on tail lamp. 7. Pull the Lamp Outside (-Y Axis) Disengaging From Trim Clip from LH & RH sides. 8. Pull the lamp at catcher points to release from BIW & take lamp out from vehicle. 9. Rotate the turn signal bulb holder in anti-clock wise direction to unlock the bulb holder from lamp. Remove the bulb holder from lamp. 10. Remove/replace the bulb. 11. Rotate the bulb holder in clockwise to lock the 12. bulb holder on lamp. FITMENT For Fitment, Follow the reverse procedure of Removal. LOW VOLTAGE ELECTRICAL SYSTEM (LV) 23
RkJQdWJsaXNoZXIy MTIwNTUz