HV ELECTRICAL SYSTEM_MR & LR 66 10. Remove drive shaft by pulling disk brake and Take out drive shaft LH / RH from gearbox. (Drain oil before carrying out this process). 11. Loosen and Remove the mounting screw and take out the motor cover. 12. Remove the connector cable connected between 3in1 Assy. & E-Drive. 13. Disconnect the wiring harness of E Drive. 14. Remove of ground cables of E-drive. 15. Remove the Hose Pipe Motor OUT and drain coolant.
RkJQdWJsaXNoZXIy MTIwNTUz