2. SYSTEM LAYOUT 1. RESTRAINT WITHOUT AIRBAG This system consists of seat belt which is operated manually i.e. occupants has to buckle the belt before driving. It consists of a micro switch that indicates if the seat belt is properly buckled or not. 2. RESTRAINT WITH AIRBAG This Vehicle is equipped with 8 loops of Air bag systems. The layouts of this loop is given below For 8 Loop system, there are additional LH/RH Side Air bag modules, LH/RH Inflatable Curtain Airbag modules and LH/RH Side Impact Sensors. A. DRIVER AIRBAG MODULE (DAB) Fitted on the steering wheel with a horn pad having tear seams. B. PASSENGER AIRBAG MODULE (PAB) Integrated type, rigidly attached to cross member with dashboard visible surface having tear seams in the area covered by the PAB module. C. SRS CONTROL UNIT Fitted on the floor tunnel along the centre line of the vehicle under the center console. D. AIRBAG WARNING LAMP Fitted inside instrument cluster. E. RETRACTOR PRETENSIONER AND LOAD LIMITER CONFIGURATION BELTS (RPLL) Fitted inside B pillar - RH side & LH side. F. FRONT IMPACT SENSOR (FIS) (RH & LH) These sensors are mounted on vertical members of front end module on the both side i.e. RH & LH. G. SIDE AIRBAG (SAB) LH & RH These airbags are located in seats which inflate between the occupant and door. H. SIDE IMPACT SENSOR (SIS) (LH & RH) These sensors are mounted on side “B” pillar at the bottom end. SRS 3
RkJQdWJsaXNoZXIy MTIwNTUz