ELECTRIC DRIVE ASSEMBLY 4. REMOVAL Remove the following Interior Trim: Garnish Moldings, Sun Visors, Overhead Consoles, Coat Hooks, Assist Straps, Factory Headliner. 1. Unplug wiring harness connected to Electric drive. 2. Remove all three (3) screws from the Electric drive. 3. Remove the electric drive from the sunroof. FITMENT For fitment follow the removal procedure in reverse. 5. REAR WATER CHANNEL ASSEMBLY REMOVAL 1. Remove sunroof. 2. Unlock Hinge snaps using a flat screw driver on both the Sides and lift the water channel from sunroof. FITMENT For fitment follow the removal procedure in reverse. NOTE Observe the Leaf spring orientation before removal; label and mark if necessary. BODY 75
RkJQdWJsaXNoZXIy MTIwNTUz