2. GLASS PANEL REMOVAL 1. Position the Glass panel in the Close position. 2. Pull and remove the flex covers on both the sides. 3. Remove the Four (4) M5 Screws both the sides on the glass panel bracket using T25 TORX driver. 4. Remove Glass panel from the vehicle. FITMENT For fitment follow the removal procedure in reverse. GLASS PANEL ADJUSTMENT FRONT Adjust the front of the glass panel by loosening the Four (4) M5 screws on the either side. Adjust the glass panel so the front edge is between 1mm higher or flush with the roof ring and tighten the screws. WARNING Do not operate sunroof after removing glass panel from the Vehicle, it will damage the rear water channel and lead to severe mechanism damage. BODY 73
RkJQdWJsaXNoZXIy MTIwNTUz