5. Remove mounting bolt of seat belt striker from both side and take it out. 6. Remove four Rear Seat mounting screw as shown in figure. 7. Remove Rear Seat. FITMENT 1. Fit rear seat backrest side bracket mounting fasteners from both side. 2. Mount two screw of seat belt striker from both side and do lose fitment. 3. Fit C Pillar lower trim. (For procedure refer C pillar removal process.) 4. Lift the backrest and apply force from center, such that both the latches are mounted firmely to striker provided in the body. 5. After latching tight the striker screws. 6. Fit four Rear Seat mounting screw as shown in figure. NOTE Lift the belts and buckle while cushion folding to design position. BODY 52
RkJQdWJsaXNoZXIy MTIwNTUz