J. FRONT DOOR REMOVAL 1. Remove electrical connection of door wiring harness. 2. Remove the check strap. 3. Support the door from the below and remove Hinge locking clip between the hinges and lift off the door and four mounting bolt from door side. 4. Slowly pull out the door and pull out the wiring harness carefully which was disconnected earlier. FITMENT For fitment follow the reverse procedure of removal. NOTE Before fitting the check strap apply grease on it. Grease type (Maker, Type): KLUBER, POLYLUB 801. Regreasing interval: 6 Months or 10,000km within. NOTE “For Side door Rattling Noise, Door Latch and striker setting need to be done & maintain 1 mm under flush condition.” BODY 23
RkJQdWJsaXNoZXIy MTIwNTUz