F. REAR BRAKE DISC REMOVAL 1. Position the vehicle on two-post lift and remove front wheel by removing wheel mounting banjo nuts. 2. Disconnect the electrical connector of EPB motor. 3. Remove brake caliper assembly & hang it properly with Brake Hose. 4. Release caliper assembly and tie aside clear off from brake disc. 5. Remove brake disc screws (02 nos.) securing brake disc to the hub. 6. Pull off the brake disc. INSPECTION Refer Maintenance, Adjustment and Test for Brake Disc inspection. INSTALLATION 1. Clean mating faces of hub and new brake disc. 2. Mount brake disc onto hub and tighten two screws to specified torque. CAUTION Do not allow caliper to hang on brake hose as it may damage the hose. BRAKES_LR 48
RkJQdWJsaXNoZXIy MTIwNTUz