1. Use the diagnostic tool to move the nut to the starting position. 2. Launch the pad change sequence of the EPB system by calling the “Enter maintenance mode” service via the diagnostic tool. 3. Remove the rear wheel and tire. 4. Disconnect the EPB actuator connector (A). 5. Remove the caliper body (A) after loosening the guide rod bolts(B). 6. Remove the brake pads & pad springs from the caliper carrier and install the new pad springs (A) & brake pads (B). 7. Rotate the caliper piston and push the direction of the arrow. BRAKES_LR 21
RkJQdWJsaXNoZXIy MTIwNTUz