BRAKE WARNING LIGHT TURNS “ON” WHEN BRAKE IS APPLIED BRAKE WARNING LIGHT FAILS TO TURNS “ON” EVEN WHEN PARKING BRAKE IS APPLIED GRABBING OR PULLING OF CAR SR.NO. CAUSES REMEDY 1 Leakage of brake fluid Investigate and correct leaky point Add brake fluid 2 Brake fluid level very low Add brake fluid SR.NO. CAUSES REMEDY 1 Brake warning light circuit faulty Repair circuit or Replace bulb SR.NO. CAUSES REMEDY 1 Incorrect tyre pressure (or) inflated Inflate both front tyres to the recommended pressure 2 Wrong wheel alignment Check and adjust as per recommended procedure 3 Loose suspension parts Check all suspension mountings and tighten. NOTE: If the above problems are not there, then proceed further with the checking of brakes for grabbing. 4 Brake light switch body touched to pedal Remove & refit the switch ensuring body is not touched to pedal. 5 Loose caliper mounting Tighten to specified torque 6 Restricted brake pipes or hose Check for soft hoses and damaged line, replace parts as necessary 7 One side caliper piston stuck Remove and rebuild caliper, lubricate the caliper slide bush properly 8 Caliper not aligned with Disc Align properly 9 Disc or drum is out of round Replace 10 TMC piston not returning correctly. Replace TMC BRAKES_LR 11
RkJQdWJsaXNoZXIy MTIwNTUz