BRAKES_MR 2 2. TECHNICAL SPECIFICATIONS SPECIFICATIONS FRONT REAR Brake Type Disc Brakes with single pot floating type caliper Leading and Trailing Drum Brakes with auto adjuster Brake Details Caliper piston dia. = 54mm For 15” & 16” Wheel Rim Brake Size = 228 X 40 Disc diameter = 274 mm Max discard dia. = 228 mm Disc thickness = 22 ± 0.1 mm Cylinder dia. =20.64 mm Discard thickness = 20 mm Brake lining area 94 cm² per brake For 218 Dia 175 cm² per brake Type of lining Moulded - Asbestos Free Moulded - Asbestos Free (Bonded Lining Replacement service limits for pad/lining Brake pads should be replaced when it’s thickness reaches below 6 mm Up to 1mm of liner thickness from shoe- rim surface is permissible Parking Brakes Not Applicable Lever type, cable operated mechanical linkages acting on rear wheels Tandem Master Cylinder (TMC) details Type = Fixed Seal Size = 20.64 mm dia Material = Aluminum Finish = Anodized Stroke = 33 mm (Primary: 16 mm and Secondary: 17 mm) Circuit = Diagonal split (Primary to FL & RR) (Secondary to FR & RL) Brake Fluid Details Type: DOT4 confirming to SAE J1704
RkJQdWJsaXNoZXIy MTIwNTUz