SUSPENSION_LR 36 4. Position the spring bottom rubber pad is to fixed to twist beam in two holes. Spring to be oriented such that end rest and against the stopper of bottom rubber pad. 5. Raise the torsion beam using hydraulic jack so that the coil spring gets compressed and shock absorber sits exactly over torsion beam properly. 6. Refit and Torque Rear Shock Absorber Bottom Fastener. (as per specified). 7. Refit the rear wheels. 8. Remove the Car from 2 Post Lift. NOTE: While fitment of damper the bottom bush to be tighten in Preloading condition. Jacking on the beam not to be done to avoid failure.
RkJQdWJsaXNoZXIy MTIwNTUz