NEW NEXON EV SERVICE MANUAL

HV ELECTRICAL SYSTEM_MR & LR 18 2. TYPES OF CHARGING Normal charging / AC charging  Approximately 15 hours (time for a 0-100% charge, may increase basis factors such as ambient temperature, electrical load on meter, vehicle usage during and before charging, air conditioning usage during charging, aux loads etc.). AC Charging (WMU)  Approximately 7 hours (time for a 0-100% charge, may increase basis factors such as ambient temperature, electrical load on meter, vehicle usage during and before charging, air conditioning usage during charging, aux loads etc.). Fast charging (DC charging)  Approximately 1 hour (time for a 0-80% charge, may increase basis factors such as charger rating, ambient temperature, vehicle usage during and before charging, air conditioning usage during charging, aux loads etc.) NOTE:  Battery performance and durability can deteriorate if the fast charger is used constantly. Use of Fast Charging should be minimized in order to help prolong high voltage battery life.  After a maximum of four fast charging cycles of battery pack, it is recommended to use Normal Charging to achieve 100% State of Charge for optimum performance of high voltage battery pack. TYPRS OF CHARGING CHARGING COMPONENT SPECIFICATIONS CHARGE PORT CHARGE GUN POWER SOURCE AC Charging (WMU)  Nominal Voltage :230V AC RMS single 50Hz (L1,N ,PE,3 -Phase)  Power Rating:7.5Kw AC RMS  Rated Current 32A AC RMS Normal / AC Charging  Nominal voltage: 230 V AC RMS Single phase, 50Hz supply.  Power rating: 3.3 kW AC RMS  Rated current 16A AC RMS. Fast / DC Charging  Charging station voltage capability should be greater than or equal high voltage battery pack nominal voltage.

RkJQdWJsaXNoZXIy MTIwNTUz