NEW NEXON EV SERVICE MANUAL

F. CAMERAS CALIBRATION This calibration procedure to be carried out for service station when HU, ORVM and front & rear cameras are replaced. 1. Start Calibration process by clicking option of SVS Calibration, which is available in technician mode from the infotainment display. a. Go to main menu b. Tap on the settings icon, which is available on the main menu screen. c. Tap on software update icon which is available on the screen. d. Click 4 times on both the sides (i.e., left and right which are highlighted below) of the package name. e. System will display the technician mode. Hence, tap on the SVS calibration icon, which is displayed on the screen. 2. Ensure environmental condition are conducive enough for SVS calibration. 3. Ensure following driving condition are satisfied during calibration. 4.Below screen will help drive ensure precondition are met. 5. Once the required images are captured calibration process starts. 6. Maximum time for completion of calibration process is 7min. 7. On calibration completion successfully. 8. Incase if any of the below condition not met during service calibration, process will fail. a. SVS Active State b. Foreground application running c. RAM Resource unavailability d. Vehicle not in forward driving e. Vehicle not moving Straight ahead Adequate illumination not available f. Low light condition, • Cloudy weather • Rainy weather • Foggy weather • g. Road surface not flat h. Vehicle speed not in optimal range (1015kmph). Max time for completion of calibration i. elapsed i.e., 7 mins 9. Incase if user aborts calibration process then initial screen appears on the screen. If anyone camera is faulty/damage then the 10. system will display blue color screen with warning message as “Camera fault, SVS is not available”. *All above figures are only for illustration purpose only. NOTE “Please drive straight at optimal speed of 1015km/h, Do not park the vehicle while data capturing!” NOTE User can drive the vehicle at any speed or he/she can stop/park the vehicle while performing step 6. Low Voltage Electrical System (LV) 243

RkJQdWJsaXNoZXIy MTIwNTUz