D. FUSE AND RELAY REPLACEMENT Fuse box is located behind the glove box. To access the fuse box, Cover Steering Column needs to be removed first. REMOVAL 1. Remove the Cover Steering Column (refer for body draft for removal) 2. Remove the mounting screw and Pull out the fuse from fuse box modules from available cutout as shown. 3. If fuse is blown, replace with same rating fuse from spare fuses provided in Under Bonnet fuse box 4. Fit back the glove box by following reverse procedure. REPLACEMENT PROCEDURE FOR RELAYS 1. Turn the ignition key to lock position. 2. Check each relay, if faulty replace with same rating relay. 3. If replaced relay of same rating is not working properly, there is probably a serious electrical problem. REPLACEMENT PROCEDURE FOR FUSES 1. Turn the ignition key to lock position. 2. Check each fuse and look for broken/open controls link wire inside the fuse. If it is burnt, replace it with one of the spare fuses of same rating. 3. If replaced fuse of same rating burns out then, there is probably a serious electrical problem. FUSE NO DESCRIPTION RATINGS F29 SUNROOF 20A F30 BACKLIGHT ILLUMINATION 5A FUSE NO FUNCTION RATING R1 ACC RELAY 40A R2 BLOWER 40A R3 SPARE - R4 SPARE - R5 SPARE - R6 HEATED REAR WINDOW 20A R7 CDL LOCK 20A R8 CDL UNLOCK 20A R9 TAILGATE RELEASE MOTOR 20A R10 IGNITION RELAY 20A R11 BACKLIGHT ILLUMINATION REGISTRATION PLATE 20A R12 SPARE - R13 WW SIGNAL INVERSION RELAY 20A R14 SPARE - R15 SPARE - R16 SPARE - R17 SPARE - R18 SPARE - NOTE Use designated fuses only • For Latest details of Fuse & Relay, Please • refer latest Owner’s Manual Low Voltage Electrical System (LV) 191
RkJQdWJsaXNoZXIy MTIwNTUz