DO’S AND DON’T As the camera is, IP protected, do not detach, • disassemble or modify in any manner from the actual position. This will show required visual information in display. Do not use camera when tailgate is open. If • tailgate is open, visual information may not be the actual rear view of the vehicle & system will warn with message ‘Tail Gate Open, Please close. When the camera is operated under fluorescent • lights, sodium light or mercury light etc., illuminated areas on the lens may appear to flicker in the display. Do not attach any advertisement or styling or • any kind of stickers on top of camera. If this happens, camera cannot provide you the visual image and may damage camera. Do not add any accessory, which will obstruct • camera field of view. CLEANING CAMERA 1. Due to environmental reasons, dust, mud or fog may accumulate on the camera lens. So regularly clean the camera lens. 2. Use water to clean the camera lens. Do not use extreme cold or hot water. Rapid changes in temperature may brittle the camera lens. Do not apply High Pressure water for cleaning. 3. Wipe the camera lens with soft cloth. 4. Do not use hard cloth or material to wipe the camera lens. This will cause scratches on the camera, and leads to deteriorated visual image on the display. 5. Do not apply organic solvent, car wax, window cleaner or glass coat to clean the camera. If this is applied, wipe it off as soon as possible. 6. Do not apply heavy force on lens, while cleaning. 7. Do not remove mud, snow on the camera lens using stick or hard material. Use normal water and soft cloth. WARNING The camera uses fish eye lens. So the size of • the objects or in the display may differ from the actual size and distances in low light conditions, the screen may darken or image may appear faint. If the tire sizes are changed, the position of the • fixed guidelines displayed on the screen may change. During rainy conditions, image may get • obscured. In such conditions, do not depend on camera view. The camera used in the vehicle, may not reproduce the same color of the real object. The camera used in the vehicle, may not • reproduce the same color of the real object. In case of damage of the rear portion of the • vehicle, camera position may change. Which causes wrong visual information on display. In case of damage, make sure that, camera is fitted properly at the intended location. In case of uneven road conditions or up-hill or • downhill conditions, do not depend on rear view camera park aid. Do not apply any kind of force on the camera. • Always use rear View mirrors along with Rear • View Camera for confirming the safety of the rear and the surrounding conditions. High humidity and variation in ambient • temperature may result into condensation inside the camera lens, which may further result into degradation of cam-era video feed on the screen. It is recommended that not to rely on camera video feed for parking assistance in such scenario. This phenomenon is temporary and will be automatically recovered with reduction in humidity and less variation in ambient temperature. The area displayed by the rear view camera is • limited. The cam-era does not display objects that are close to or below the bumper, underneath the vehicle, or ob-jects out of the camera’s field of view. The area displayed on the screen may vary according to vehicle orientation or road conditions. Low Voltage Electrical System (LV) 176
RkJQdWJsaXNoZXIy MTIwNTUz