D. ELECTRONIC PARK BRAKE (EPB) SWITCH (IF EQUIPPED) EPB switch is located behind the gear shift lever replacing the conventional parking brake (Hand brake lever connected to brake mechanism by cable). EPB is applied by pulling up the EPB switch and can be released by pushing down the EPB switch, which needs the vehicle to be at ignition / Engine ON condition. Always ensure parking brake is released and parking brake-warning lamp is OFF before start of the drive. Park brake warning lamp in cluster at engine running condition indicates failure in brake system and vehicle needs to be checked at TATA Service center. If this is not possible use the vehicle with extreme precaution until you reach service center. CIRCUIT DETAILS PINOUT DETAILS NOTE Kindly ensure EPB indication turns on in the • Cluster. Also EPB is applied automatically if Engine • is turned off and Gear lever is engaged to park position for Automatic transmission. During parking the vehicle on Steep incline • or trailer is attached kindly ensure EPB can hold the vehicle before leaving. WARNING Do not use parking brake in vehicle running • condition except for emergency situations like service brake failure. This can damage vehicle brake system. If the EPB fails to apply, prevent vehicle • movement by blocking the rear wheels. Low Voltage Electrical System (LV) 46
RkJQdWJsaXNoZXIy MTIwNTUz