GENERAL 9 7. JACK AND TOOL BOX LOCATION IN VEHICLE: 8. TOWING THE VEHICLE: When towing a break down vehicle, certain precautions and procedures must be taken to prevent damage to the vehicle and/or components. Failure to follow standard towing procedures could result in an accident or injury due to the unsafe operating condition. To ensure proper towing and to prevent accidental damage to your vehicle, take help of a TATA MOTORS authorized EV dealer or a commercial tow-truck service. • Open the tailgate and remove tow hook from the tool kit. • Open the tow hook cover provided on the front bumper by pressing it at the bottom part and simultaneously pulling it at the top (as shown in fig). Screw in and tighten the tow hook in clockwise direction. • After towing, remove the towing hook •and press fit the cover properly. • Place the towing hook in the vehicle •tool kit. Tow Hook Location Correct Methods WARNING • Do not get under your vehicle after it has been lifted by a tow truck. • For towing a vehicle, the best way is to use a flat bed truck. Alternatively use a rigid tow bar. • Switch ‘ON’ the hazard warning indicators of both the vehicles to warn other road users. • Limit the speed to 20-30kmph. • In case of brake failure, use the parking brake to control the vehicle. • Fasten the tow rope or tow bar at the towing eyes. Otherwise, the vehicle could be damaged. • When towing, pull away slowly and smoothly. If the tractive power is too high, the vehicles could be damaged.
RkJQdWJsaXNoZXIy MTIwNTUz