9. ON VEHICLE PROCEDURE A. FRONT STRUT ASSEMBLY REMOVAL • 1. Remove wheel rim cover (if fitted). 2. Loosen wheel nuts. 3. Lift the vehicle using two-post lift allowing the front suspension to hang freely. 4. Unscrew wheel-mounting bolts and remove the wheel. 5. Remove ABS wheel speed sensor harness mounting bolt (if equipped). 6. Remove the Stab link and the brake hose mounting from the strut. 7. Unscrew the strut holding bolts (Camber bolt) from the Knuckle. 8. Remove the Leaf screen Cover. 9. Loosen & Remove strut top mounting Nuts.( 3 Nos) Remove strut assembly from bottom. 10. INSTALLATION: • 1. Carry out the above step in reverse order for its assembly. 2. Fit bolts and nuts. NOTE First, tighten top eccentric bolt and then the bottom-mounting bolt. 1. Tighten all bolts and nuts to specified torque mention in Torque table. CAUTION 1. Ensure that brake hose does not damage during installation. 2. Strut having the same color code mark on the spring should be assembled on the left hand and right hand side. SUSPENSION_DIESEL 24
RkJQdWJsaXNoZXIy MTIwNTUz