C. REMOVAL OF WHEEL HUB 1. Place the vehicle in the two-post lift and apply parking brake. 2. Remove wheel rim cover. 3. Loosen the wheel mounting bolts. 4. Lift the vehicle till the front wheels are off the ground. 5. Unscrew the wheel mounting bolts and remove the wheel. 6. Unscrew and remove tie rod ball joint nut. 7. Remove tie rod ball joint using puller part No. 2871 5890 4601. 8. Support the lower arm from bottom. 9. Unstake and unscrew drive shaft nut and take out the thrust washer. Remove holder from the hub assembly. 10. a) Remove the caliper housing from the knuckle. b) Unscrew the disc holding screws and remove the disc. SUSPENSION_PETROL 30
RkJQdWJsaXNoZXIy MTIwNTUz